Analog DevicesAD8001AQOperationsverstärker
Op Amp Single High Speed Amplifier ±6V/12V 8-Pin CDIP Tube
| Not Compliant | |
| EAR99 | |
| Active | |
| 8542.33.00.01 | |
| SVHC | Yes |
| SVHC überschreitet Schwellenwert | Yes |
| Automotive | No |
| PPAP | No |
| High Speed Amplifier | |
| High Speed Amplifier | |
| 1 | |
| 5.5@±5V | |
| 6 | |
| 12 | |
| ±3 | |
| ±5 | |
| ±6 | |
| 6@±5V | |
| 5.5@±5V | |
| 70@±5V | |
| Single|Dual | |
| 1100 | |
| 1200@±5V | |
| 2@±5V | |
| 18@±5V | |
| 2@±5V | |
| 50 | |
| 50 | |
| 10 | |
| No | |
| -40 | |
| 85 | |
| Military | |
| Tube | |
| Befestigung | Through Hole |
| Verpackungshöhe | 3.56(Max) mm |
| Verpackungsbreite | 7.87(Max) mm |
| Verpackungslänge | 10.29(Max) mm |
| Leiterplatte geändert | 8 |
| Standard-Verpackungsname | DIP |
| Lieferantenverpackung | CDIP |
| 8 | |
| Leitungsform | Through Hole |
Amplify voltage signals in your electronic circuit design by implementing this current feedback amplifier AD8001AQ OP amp from Analog Devices. Its maximum power dissipation is 1100 mW. Its typical dual supply voltage is ±5 V, with a minimum of ±3 V and maximum of ±6 V. This op amp has a minimum operating temperature of -55 °C and a maximum of 125 °C. This device uses one or two power supplies. It has a single channel per chip.
| EDA / CAD Models |
KI-Systeme in der Medizin
Design-Tipps, empfohlene Komponenten und KI-Insights für bessere Diagnose- und Therapiegeräte – im aktuellen Whitepaper.