PMP9380, Synchronous Inverting Buck Converter Application Reference Design
Referenzdesign unter Verwendung des Teils LM46002PWP von Texas Instruments
Bilder
1 / 3
Zugehörige Dokumente
Für Endprodukte
- Buck Converter
Beschreibung
- PMP9380, Synchronous Inverting Buck Converter Application Reference Design. The PMP9380 reference design is a Synchronous Inverting Buck Converter using the LM46002 Synchronous Buck Regulator IC. The design accepts an input voltage of 18Vin to 42Vin and provides an output of -15V capable of supplying a maximum current of 0.5A to the load. This design was built on a 4-layer board (1 oz. copper on top and bottom layers and 0.5 oz. copper on two inner layers). Tests in this report were performed at 18Vin, 30Vin and 42Vin
Haupteigenschaften
-
Conversion TypeDC to DC
-
Input Voltage18 to 42 V
-
Output Voltage-15 V
-
Output Current0.5 A
-
TopologyBuck
Empfohlene Bauteile (1)
| Teilenummer | Hersteller | Typ | Beschreibung | |||
|---|---|---|---|---|---|---|
|
LM46002PWP | Texas Instruments | DC to DC Converter and Switching Regulator Chip | Conv DC-DC 3.5V to 60V Synchronous Step Down Single-Out 1V to 28V 2A 16-Pin HTSSOP EP Tube | In den Warenkorb | |